How to put a glass/Perspex window in a kayak
Submitted by black gen on Sat, 2015-06-20 20:15
I'm looking at putting a Perspex viewing window in a surf kayak
will help with finding ground when diving
couldnt find much info on here or the net really
does anyone have any clue about this or better still a link to one already done I can look at?
thanks for the help
jess
.thumbnail.jpg "exmouth - Cod Hookup")
Jayden20
Posts: 672
Date Joined: 29/08/11
Finn gizmo kayaks have them.
Finn gizmo kayaks have them. You may be able to see how they have done it
black gen
Posts: 762
Date Joined: 13/04/11
Lookin for a cheaper option
Lookin for a cheaper option then $850-900
but thanks anyway
Jayden20
Posts: 672
Date Joined: 29/08/11
I was saying to have a look
I was saying to have a look at one for ideas. Not to buy one. Sorry for the confusion
black gen
Posts: 762
Date Joined: 13/04/11
No worries mateyeah it does
No worries mate
yeah it does look neat
Drillzy87
Posts: 55
Date Joined: 16/10/12
Should be able to cut a hole
Should be able to cut a hole in the base and then drill out holes in a piece of acrylic or polycarbonate, mark the holes out into the kayak and drill them holes. Put a bead of silicon around the contact areas and then bolt up.
AMH Plastic Fabrication And Repairs- For all Fabrication big and small
perth fisher
Posts: 132
Date Joined: 02/06/11
ive been considering getting
ive been considering getting a kayak with a window for next summer
it could be fun for the kids to use
Rocktron
Posts: 66
Date Joined: 08/02/13
sealing it will be the biggest issue
hey mate, i have 2 gizmos with the viewing chambers in them. The actual perspex is made about 15mm bigger than the opening all the way round, and this is where you glue it on. Make sure you use a quality water proof silicone, not the cheap shit or you WILL have leakage. The finn gizmos use an american glue that mixes with 2 parts and then they also have screws that also lock the perspex in place. I can send you a photo if you want that will show the glue under the perspex?
Fisher Kid
Posts: 358
Date Joined: 16/10/12
got a gizmo, didn't pay
got a gizmo, didn't pay anything near 800... go to the factory in oconnor and cheaper their I think. to be honest you need spot on clarity to see if its depper than 5m. Otherwise you only see as far as normal vis as if you were snorkelling
Fishing and catching are two different things. But i want to learn how to catch.