New trailer - questionable galvanised finish
Submitted by tjayliffe on Tue, 2023-04-11 11:11
Morning all,
Last week I picked up a new boat + trailer which we'd been waiting on for close to a year. We paid very good money for the trailer and boat from a very well known Australian brand.
When I got it home for a decent look, I noticed the finish on the galvanising looks pretty sub-par with areas already flaking off and spot rust starting in sections already.
It also appears as though the trailer wasn't cleaned properly prior to galvanising, given areas of very rough surface finish. I assume the proud points will wear faster resulting in accelerated risk in rust.
My questions to those that know anything about galvanising and current industry standards -
- Is the finish below what would be considered a tradesman / industry standard for marine galvanising
- Will the finish impact the longevity of the trailer
- What can be done to fixing the issue i.e. sandblast re-galvenise etc
- Anyone else had any issues like this recently? If so, what happended when it was flagged with the supplier
Thanks in advance!
Cheers,
Tim
Image Upload:
Bucko
Posts: 144
Date Joined: 08/05/10
Hi mate, few different
Hi mate, few different issues going on there, none of them look like show stoppers to me.
First pic looks like crap off the top of the galv bath (or maybe the bottom, might have gone too deep), not pretty but prob better to leave there than try and fix.
If they tried to fix this, it would of been by grinding / flap disc. They may go right through the zinc then you would end up with a repair.
Second pic, its hard to dip chain without it all sticking together. Not worth fixing I don't recon. You could cut the chain off and replace with fresh galv chain.
Third pic is weeping from the vent hole / stich weld. Acid gets in between the steel and does not all come out during the dip. It often weeps out later and causes this. Might be a bit of ash from the bath there too.
4th pic, not sure, looks ok to me.
Last pic not sure either, maybe handling damage?
All of this is not great to look at, and grounds for you to complain, but likely not enough to get the trailer re-dipped.
Send these to the people you got the boat from and see what they say.
You might get lucky.
I wonder if that was done here in Perth, or somewhere else?
Cheers
Craig
sea-kem
Posts: 14989
Date Joined: 30/11/09
You've nailed it mate, acid
You've nailed it mate, acid bath weep.
Unless all the steel sections are seal welded then you'll always have this problem. The chainlinks I wouldn't be concerned about as there literally a moving part.
On the whole it looks ok, just need to give it a good freshwatwer flush each use.
Love the West!
blu2fish
Posts: 80
Date Joined: 23/01/13
New trailer - questionable galvanised finish
Had a trailcraft trailer acid washed and gal dipped a couple of years ago job was just a lick and a spit wouldn't recommend the company that did it to anyone.
Swompa
Posts: 3887
Date Joined: 14/10/12
If it is a stock standard
If it is a stock standard trailer I would take it back. If it is custom built then I still wouldn't be happy and would send photos to the manufacturer and ask how they are going to fix it.
keg
Posts: 398
Date Joined: 17/07/07
trailer
i had my trailer redone by hartways and took it back to question a few things similar to the pics only to be told it`s normal. now 1.5 years later my trailer has more rust in it than when i took it in to be re galvanised :-(
still trying
Posts: 1059
Date Joined: 27/06/17
New standards are not worth
New standards are not worth talking about. You will never get 1980's or prior or 20 years past standards now not even close.
rather be fishing
sea-kem
Posts: 14989
Date Joined: 30/11/09
Guy the galvanisers do have
Guy the galvanisers do have different treatment options and thickness standards, but not cheap. As I mentioned above a lot of it to do with prep and sealing.
Love the West!
still trying
Posts: 1059
Date Joined: 27/06/17
I have seen some really
I have seen some really heavy coated stuff at work was going to a prison up north from memory.
rather be fishing