wheel bearing hubs
Submitted by dakka on Sat, 2009-01-03 20:48
hi all
need to no if there is a simple way of telling if your wheel hubs are holden or ford so i can change the bearings.
cheers
dakka
_____________________________
*name darryl(alias dakka)
*married 3 kids 1 dog 2 cats
*lives in warnbro
*new to boatiing
*boat 15 ft ali with a 30hp mariner
*loves fishing,footy and cricket
*fish true now and we will be able to truely fish in the future
____________________________________________________________________________
"If we all fish for the future now there will be fish in the future"
dagree
Posts: 660
Date Joined: 08/12/07
Can't tell you which one is which
But if you take one off and get the number off the bearing and go to Repco (or Supercheap!!!!!!!) you can get the equivalent and find out which one it is. I believe the difference is the ID or OD of the bearing.
Cheers,
David
Cheers,
David (AKA Grumps)
Location: Heathridge. Toys: 120 Series Prado ... 5.3 Stacer Seamaster/Merc 90HP.
diji
Posts: 404
Date Joined: 31/03/07
For the cost darryl
Just strip em down and replace them as dave said the bearing number or stud pattern is different,off the shelf both you will have no troubles getting them.
I have some old holden shells in the shed ground down for tapping the new one's in if ya want or need them send us a pm
Jason
Salmo
Posts: 913
Date Joined: 15/08/05
Fords are for Ho's
they have a bigger ho....I mean hole....
the smaller outside bearing is 22mm I/D
and buy MARINE bearings.....you need the rear seal
fishfinger
Posts: 64
Date Joined: 08/09/07
wheel hubs
gday i went down this road my self take the hub to a tailor place there one in o'connor and it was cheaper to get a new hub that came with bearing and all and keep old one in oily bag for spare all new no broken nuts etc and u will no what stud patten
Mick.C
Posts: 184
Date Joined: 09/08/08
If you have bearing buddies
If you have bearing buddies put the seal in with the lip facing out. It will stop the water from going into your bearings and let the grease push through from the inside. I cant remember the numbers of the bearings but just rip them out and get the numbers. Nearly all auto shops will have them on the shelf.
scottnofish
Posts: 1621
Date Joined: 28/08/07
just watch out those cheep hubs
use really sh@# bearings that wont last 1 year
Sex is Great, But Fishing Lasts All Day!