prop removal
Submitted by gpc123 on Tue, 2008-12-09 19:57
Found a rock on saturday night in the river and need to replace my prop.
Not to sure on how to remove any advise please?
Motor is 1998 mariner 60Hp.
Also anybody know were i can buy a new prop?
Regards:Geoff
____________________________________________________________________________
Single dad and proud of him
mako magic
Posts: 5785
Date Joined: 03/08/05
looks nasty, pretty bad bend
looks nasty, pretty bad bend there
maybe try ebay or a outboard motor salvage yard
The Tackle shack, for all your fishing needs
huge range of stock to suit any fisherperson.
PH:9248 3800 unit 3/11 Alexander drive Malaga
mussels
Posts: 65
Date Joined: 06/10/08
prop repair
m&j engineering zeta cres occonnor can repair them, they have seperate prop bussines.
gpc123
Posts: 265
Date Joined: 12/02/07
Thanks guys. Looking for
Thanks guys. Looking for someone NOR, No split pin in this mussels thanks for the pm.
Regards:Geoff
Single dad and proud of him
mussels
Posts: 65
Date Joined: 06/10/08
prop
I would make sure you put one in when it is fixed this stops the nut from unscrewing.
jng
Posts: 488
Date Joined: 03/08/07
hey gpc, i bought a spare
hey gpc, i bought a spare prop from these guys. They had a couple spare 2nd hand lying around.
Just Propellers WA
Unit 1 - 4 Leeway Court
Osborne Park 6017
9244 9255 or 9244 5955
gpc123
Posts: 265
Date Joined: 12/02/07
Thanks jng,will give then a
Thanks jng,will give then a call tomorrow.
Regards:Geoff
Single dad and proud of him
Feral
Posts: 1508
Date Joined: 01/11/06
yeh gpc .. your prop has the
yeh gpc .. your prop has the locking ring and not the split pin ... just pry the brass locking collar off gently first then undo the castle nut.
gpc123
Posts: 265
Date Joined: 12/02/07
Thanks Feral. Regards:Geoff
Thanks Feral.
Regards:Geoff
Single dad and proud of him
diji
Posts: 404
Date Joined: 31/03/07
The locking ring comes off with the castle nut
Just bend the tabs straight and take the castle nut off the locking ring will turn with the castle nut until there is enough gap between them once you remove it you see its actualy a washer with locking tabs