New Genesis Build
G'day all, hoping to sign a contract on my dream boat this week. I think I have most things covered but any hints or tips please let me know
6.1m Walk around (Island Cab)
Full Hardtop carpet lined, rocket launcher, grab rails
F200 Yamaha DEC Yamaha CL5 display,
Unpainted, raw ally finish
6mm bottom
4mm sides
2.5m beam
Reverse chines, planing strakes
Sliding Glass Windows from front, folding centre
Extendable Shade awning
Zip up cabin door
Cabin storage under cushion seats
Positive buoyancy
Bow lounge
Low profile split bow rail
Double bow roller
Cleats/Bollards
Coaming bolster pads sides, gunnels
Deep Wide gunnels
10 welded rod holders
10 welded stubby holders
Transom lockable shelf
Live bait tank with ally hinged lid
Super deluxe bait board with tackle storage and ski pole
Self draining deck, scuppers
Double door, insulated Kill tank
Carpet floor
300L Fuel Tank, refuel on Left
Helm seat with flip up lid and lockable storage
sliding tray for 38L Engel under passenger seat with dicky seat
Welded tie down points in deck corners
Bus bar with 12 switches
Simrad NSS12 EVO3S
GPS Antenna
Navionics card
TM275LHW 1kw transducer
Salt Deck wash
Freshwater deck wash 75L
Automatic Bilge pump
VHF Radio
dual battery 105amp with DVSR
Fusion Bluetooth stereo
Ctek battery charging plug in dash
12v outlets for elec reels
Nav lights
Cabin lights
Cockpit lights
Rear facing Deck lights,
Strip lights under gunnels
Epirb
PFD's
Flares
Trailer
I Beam dual Axle trailer
Checker plate wheel arches with step
Winch post with step to bow
Brakes - mechanical/electrical
Torsion suspension
Spare wheel and hub
Drive on wedge
Boat catch
Led lights
Tie down points
Later on I will look to add
Underwater Blue LED lights
Outriggers
Removable cray pot winch
USB ports in dash
Bad days fishing beats a good day at work
tiimmbo
Posts: 695
Date Joined: 16/08/09
Anchor winch
Anchor winch
721daryl
Posts: 22
Date Joined: 05/03/15
Will have the bracket for a
Will have the bracket for a drum winch, but I can't remember the last time I used an anchor to hold bottom, always drift with a sea anchor
Bad days fishing beats a good day at work
tiimmbo
Posts: 695
Date Joined: 16/08/09
Nice, boat looks like it
Nice, boat looks like it will be awesome. Declkies can pull anchors anyway, mine got sick of watching me pull the anchor few years ago so bought me a winch so he didn't feel guilty anymore !
Gav475
Posts: 397
Date Joined: 16/11/11
genie
Had a Genie . Loved it was a great safe boat. Im sure you will love yours and get years of safe reliable boating from it. Jelous az, enjoy.
meglodon
Posts: 5981
Date Joined: 17/06/10
Whew and you thought filling in all the requiremnts
For the new house took some doing.
You have got yourself and those lucky enough to share it a magnificent new boat.
That is one hell of the Christmas present
721daryl
Posts: 22
Date Joined: 05/03/15
Thanks mate, your not wrong
Thanks mate, your not wrong there's so many things to consider. I'm only going to do this once and I wanna get it right the first time. Super excited. My whole life has been building to this point. House, car, shed... Dream boat!
Bad days fishing beats a good day at work
721daryl
Posts: 22
Date Joined: 05/03/15
Thanks mate, your not wrong
Thanks mate, your not wrong there's so many things to consider. I'm only going to do this once and I wanna get it right the first time. Super excited. My whole life has been building to this point. House, car, shed... Dream boat!
Bad days fishing beats a good day at work
eziliving
Posts: 875
Date Joined: 30/12/09
another meter! Sounds like
another meter! Sounds like it will be well apointed. Boat cover.
Get busy living, or get busy dying!
Stevo81
Posts: 1278
Date Joined: 16/04/12
Nice!Going for the high wide
Nice!
Going for the high wide tranny cause u do more trolling than bottom fishing I assume?
Heavily insulate any built in fish boxes
•••••••• Electrical Contractor NOR ••••••••
721daryl
Posts: 22
Date Joined: 05/03/15
Love bottom fishing and
Love bottom fishing and trolling equally but will get into deep dropping when the finances allow the gear
Bad days fishing beats a good day at work
dodgy
Posts: 4578
Date Joined: 01/02/10
Just missing the 12v oven
Just missing the 12v oven
Does anyone know where the love of god goes, when the waves turn the minutes to hours?
Chinbald
Posts: 317
Date Joined: 21/02/09
6 months off work
That would be exciting, Leeman, Abrolhos, Kalbarri, Turtle Bay, Koks, Ningaloo, and a Marlin in Exmouth to ice the cake.
New boat build is a thing of dreams, unfortunately my wife wants a new house.
squidvicious1
Posts: 824
Date Joined: 22/07/10
Trolling motor mount, spot
Trolling motor mount, spot lock anchoring for bottom bouncing. You get more time on the lucky Spot instead of drifting the going back
and starting the drift again.
Alpha
Posts: 194
Date Joined: 13/02/17
Sounds like
Sounds like a great fit out. Fly-by -wire controller and walk way down your trailer
721daryl
Posts: 22
Date Joined: 05/03/15
Yes mate I’m going the new
Yes mate I’m going the new DEC 200hp Yamaha (Digital Electronic Control). Apparently so smoothly to operate and easier to set trolling speeds. The GC30T (3t) trailers are mint with all the fruit including full skid drive on, boat catch, walkway, checker plate wheel arches, led lights, torsion suspension, stainless hubs, winch post steps
Bad days fishing beats a good day at work
Alpha
Posts: 194
Date Joined: 13/02/17
Sorry cobber
didnt see the dec bit. You'll love it I've got it and it's so good. I wouldn't go back now having it. I'm jealous of the set up.
Faulkner Family
Posts: 18027
Date Joined: 11/03/08
Have you thaught about an
Have you thaught about an inverter so you can run normal appliances like a kettle for coffee on cold mornings or even a laptop on your extended trips away
RUSS and SANDY. A family that fishes together stays together
721daryl
Posts: 22
Date Joined: 05/03/15
Ooh good tip, cheers
Ooh good tip, cheers
Bad days fishing beats a good day at work
scubafish
Posts: 962
Date Joined: 15/08/12
Unpainted, raw ally finish
Many many moons ago,used to polish props ,used to put a small orbital sander over the blade to finish came up good .Could do same with the ali then clear coat it to stop oxidation ,would look really good .
http://img.gg/BQ91Sys
Tim
Posts: 2497
Date Joined: 26/09/06
Switches
Make sure you check what sort of switches you are getting.
Dont install one of the cheap toggle setups. Go for some good quality ones and do it right the first time of you will have a big cutoutto fill.
Also check to make sure they are running a heavy enough cable to the dash.
Boat I boat had a rewire before the sale and i had to replace the cable run as it was tiny and no where near enough to run the electronics
Shark1
Posts: 1086
Date Joined: 21/05/12
grab box for the flares if i
grab box for the flares
if i may ask whats the quote on that setup trailer cost seperate please
721daryl
Posts: 22
Date Joined: 05/03/15
Locked and loaded
Signed up for the dream boat today, can't wait
Bad days fishing beats a good day at work
Darren253
Posts: 570
Date Joined: 23/07/16
Congrats
What is there build time like currently?
721daryl
Posts: 22
Date Joined: 05/03/15
Build Time
Im still 2-3 months from mine starting and its a 12 week process so expecting mid year
Bad days fishing beats a good day at work
721daryl
Posts: 22
Date Joined: 05/03/15
Quick update, Boat build is
Quick update, Boat build is not far off starting and I managed to convince the mrs that the following upgrades were necessary so they have been added to the list:
6.3m
12v horn
12v & USB ports to passenger & cab
LED Light bar to drivers side of cab
1x8 & 1x6 custom switch panels
2 x OceanLED X4 underwater lights
Picnic table
lockable cabin door
stereo changed to Fusion RA210 with 4 x 6" JBL Speakers
300w solar panel on roof with solar monitor
pot winch, tipper, foot pedal and capstan
stressfree elec winch
reelax roof mounted outriggers
Bad days fishing beats a good day at work
Brock O
Posts: 3228
Date Joined: 11/01/08
Good Win with the
Good Win with the extras...its easy at the end with the cost rising to say, nah I'll fit that later or I don't really need that yet.
Get it done now...the cost will quickly be forgotten.
Look forward to seeing the build.
twicther
Posts: 202
Date Joined: 31/12/11
A bit late But
Not sure if you do any leisure activity, but i take the family onto the lake for a swim and a transom door and step are essential for getting in and out.
Does sound like you have thought of everything. Well done.
721daryl
Posts: 22
Date Joined: 05/03/15
Transom Door and Ladder
Transom door and ladder come as standard
Bad days fishing beats a good day at work
Silver Fox
Posts: 1111
Date Joined: 19/06/14
Mermaid line and float
Can't be without one of them. Perched out the back of the boat on the float drinking a beer is always good fun!.
My wife understands why I clean my rods n reels in the shower....
Swompa
Posts: 3887
Date Joined: 14/10/12
How's the build going? 18
How's the build going? 18 month build time now.
721daryl
Posts: 22
Date Joined: 05/03/15
Just about to start,
Just about to start, outboard supply may be an issue tho
Bad days fishing beats a good day at work
Rob H
Posts: 5800
Date Joined: 18/01/12
Not ordered them yet?
Not ordered them yet?
Give a man a mask, and he'll show you his true face...
The older you get the more you realize that no one has a f++king clue what they're doing.
Everyone's just winging it.
dodgy
Posts: 4578
Date Joined: 01/02/10
Merc has started cancelling
Merc has started cancelling orders. Yamaha stopped replying to emails and expected to be next.
Does anyone know where the love of god goes, when the waves turn the minutes to hours?
sea-kem
Posts: 14989
Date Joined: 30/11/09
Cancelling orders? Just
Cancelling orders? Just can't supply?
Love the West!
dodgy
Posts: 4578
Date Joined: 01/02/10
Think there is some supply
Think there is some supply but only specific dealers are getting them. Mate of mine is a boat builder and had 4 mercs on order that have been dropped.
Does anyone know where the love of god goes, when the waves turn the minutes to hours?
swarf
Posts: 58
Date Joined: 07/08/13
outboards
I ordered a 300 yamaha in June due for September delivery and have been told the same they just arent getting any answers on when it might be here.
Only info I got was no one has officially said it isnt coming
Darren253
Posts: 570
Date Joined: 23/07/16
I ordered a Merc 300 V8 in
I ordered a Merc 300 V8 in May 2020 for a October Delivery... Was given the nod that there was big problems and my engine had slipped to an unknown date 2022.
After a few weeks of anger and panic, Merc Australia has come to the party and have committed to an engine for me in mid Nov 2021.
I've heard lots of horror stories regarding Yami's and boats due Nov/Dec 2021 but engines only coming Q2 2022.
Swompa
Posts: 3887
Date Joined: 14/10/12
Wow wee!
Wow wee!
Darren253
Posts: 570
Date Joined: 23/07/16
Double
Double
Swompa
Posts: 3887
Date Joined: 14/10/12
I have a quote for a 6700
I have a quote for a 6700 cuddy. Certainly a good looking quote but build time is a killer. I guess thats why the quote is perticularly good.
Looking forward to seeing how the build goes.