Fiberglass polish
Submitted by gpc123 on Sun, 2008-10-12 08:35
Have to do the boat, what do people use, brand,were do you get it, and how do you applie.Ie: by hand or power buffer ???
Regards Geoff
____________________________________________________________________________
Single dad and proud of him
Faulkner Family
Posts: 18029
Date Joined: 11/03/08
septone
marine pollish got mine at boat shop
i just apply by hand and buff off by hand
electric buffers can burn yhe pollish if your not carefull
RUSS & SANDY
"A family that fishes together stays together"
RUSS and SANDY. A family that fishes together stays together
alfred
Posts: 3097
Date Joined: 12/01/07
This is a tough one. If
This is a tough one.
If the boat never had wax on it do not put any on. Use a gelcoat sealer and you will only have to do it once every 6 - 12months or so. Once you wax, you have to keep waxing. If you put sealer over wax, the gelcoat will turn yellow.
18 Outrage, Johnson 140hp 4stroke and 190 Outrage, 150 Mercury Verado
Dean
Posts: 1943
Date Joined: 23/02/07
meguiars wetlook
meguiars wetlook
Ryan Thipthorp (not verified)
Posts: 16
Date Joined: 01/01/70
K&H
If its really bad geoff then the K&H Marine F/G "extra Cut"....keep in mind that shit really cuts throught so only on really old/stuffed f/glass!
If its just needs normal TLC polish then the K&H Marine F/G "Polish/Wax"
I use elbow grease with deckys normally making the task quick & easy. I'm not a buffer fan unless its a really big boat and plenty of flat surfaces!
* Oceanside- Advice, Knowledge, Experience....that's our difference *
Owner/Operator "Oceanside Tackle & Marine"
364 South Street, O'Connor, Perth Ph# 9337 5682
gpc123
Posts: 265
Date Joined: 12/02/07
As you can see in my photo
Thanks all. As you can see in my photo the hull has brown stains & the orange is very dull.
Regards:Geoff
Single dad and proud of him