CVZ Service Help
Submitted by jay_burgess on Mon, 2007-09-10 17:19
g'day guys need help servicing my CVZ 203. Can't seem to work out how to remove the right hand side plate (probably really easy but it's got the better of me atm)... I've removed the left hand side plate, handle nut, handle, star drag & bearing washer as well as the cast control cap. I've loosened R/S screw B (see schematics)... but can't seem to work out where to go from here.
What can I use to clean parts (safely) and what parts need to be oiled/greased..??
http://www.mikesreelrepair.com/schematics/schematic.php?url=Daiwa/Daiwa%20Millionaire%20CV-Z203A.pdf
Simon C
Posts: 801
Date Joined: 01/05/07
jay - from memory you need
jay - from memory you need to undo the screw on the left hand side that goes through the worm drive.
i clean mine with a soft cloth, then oil on the bearing(shimano) and cals grease wherever grease is needed
Simon C
Posts: 801
Date Joined: 01/05/07
another trick is to use
another trick is to use contact cleaner from dick smith.
To reoil your bearings you can heat the oil in a spoon with a lighter whilst the bearing sits in it.
SPESS
Posts: 3356
Date Joined: 29/12/06
Good idea wrassehole but
Good idea wrassehole but just watch that contact cleaner as it will melt and warp small plastic parts if theres any, but is still great to get rid of all gritty matter.
Keep it tight, reeeeeeel tight!