centre console screen
Submitted by wayneleech on Fri, 2009-01-09 15:31
hi all,
I've got a 5.4m profish (http://www.trailcraft.com.au/boats/boat.aspx?model=540profish ) which has a side console. I was wondering if anyone knows where you can get screens for the console?
At the moment i have my sounder and gps mounted on the top of the console and it's starting to get abit wheathered from all the sea spray so am looking for something to protect it.
cheers
wayne
carnarvonite
Posts: 8669
Date Joined: 24/07/07
Wangara
There is a place in Buckingham drive Wangara,on the left as you go up the hill.Give them them the measurements or take your boat in and they will bend one up for you.Other place is Westcoast windows down in Henderson
damo6230
Posts: 2029
Date Joined: 07/06/08
depends on what you want
collaspable, single/three sided and what material.
boatbuilder can do ally of perspex shop etc
RECFISHWEST Member
fishcrazy
Posts: 1235
Date Joined: 27/01/07
beta marine
could try beta marine windows in o, connor ph 93146966
wrassinator
Posts: 554
Date Joined: 26/11/08
Or DIY by going to bunnings.
Or DIY by going to bunnings. $50 for a 1000mm x 500mm polycarbonate in fashionable colours such as "clear" and "charcoal".....that's wot I did for a cheap CC conversion. Seems to be holding in OK thus far....
wayneleech
Posts: 362
Date Joined: 27/06/08
thanks for the replies
thanks for the replies fellas,
this isn't the boat i have - though this is similar to what i'm looking for;
http://www.cameltit.com/images/console.jpg
i saw a profish the same as mine the other day with one like the above on his console though unfortunately i was on the freeway at the time so i couldn't ask him:(
i tried calling trailcraft today though couldn't get through to them. I thought perhaps this could be an add-on you could purchase though after looking at their website it doesn't appear to be.
carnarvonite - do you know the name of that place in wangara?
Big J
Posts: 129
Date Joined: 16/12/07
I went to Mandurah Plastics
I went to Mandurah Plastics at the start of last year and he did a tinted screen for $100 for me...Jarrad
carnarvonite
Posts: 8669
Date Joined: 24/07/07
Forget the name
Forgot the name ,but as you go up the hill in Buckingham drive, they are on your left in one of the sets of units past the street on the left.
Their name used to be on a bus seat on the right hand side of Ocean reef road as you go up the same hill just before the turn and servo on your right.[Heading east from Wanneroo rd]
????Acrylics I think
wayneleech
Posts: 362
Date Joined: 27/06/08
okay - thanks again, i'll go
okay - thanks again, i'll go check them out..
cheers jarrad - if i can't find one up my way (mindarie) i'll take a look mandurah plastics....
wayneleech
Posts: 362
Date Joined: 27/06/08
is this the place
is this the place carnarvonite? http://www.productiveplastics.com.au/
carnarvonite
Posts: 8669
Date Joined: 24/07/07
Yep
Thats the one Wayne,they should be able to do the trick
dagree
Posts: 660
Date Joined: 08/12/07
Thanks Guys
Now I know where to get the replacement screen materials for our our boat locally... I was going to ask for recommendations next week. Thanks for asking for me Wayne
Cheers,
David
PS..... Mine will be an easier solution as they will be straight sections with no bending required.
Cheers,
David (AKA Grumps)
Location: Heathridge. Toys: 120 Series Prado ... 5.3 Stacer Seamaster/Merc 90HP.
feral1975
Posts: 638
Date Joined: 22/02/07
im in need of new
im in need of new screen aswell , the last one was made out of the thick shatterproof stuff but no longer have the t top frame it was mounted on
I wish I had an emo lawn so it would cut it self